Hammered vs. Milled British Coinage: Dating & Mint Marks
From Anglo-Saxon silver pennies and Charles I Civil War gold to Pierre Blondeau's 1662 screw-press revolution, master the structural traits of both eras.
How Hammered Coins Were Struck Across Ten Centuries
For roughly a millennium—from early Anglo-Saxon sceattas and Offa's silver pennies through medieval groats, Tudor gold Angels, and Charles I's emergency Civil War coinage—British coins were manufactured entirely by hand. Moneyers cut blanks (flans) from hammered sheet metal, placed each blank over a lower anvil die (pile), positioned an upper die (trussel) on top, and struck it with a heavy iron hammer.
Because blow force, angle, and blank thickness varied with every strike, no two hammered coins are mechanically identical. Specialists evaluate hammered coins not only for wear, but also for centring, flan roundness, legend completeness, and absence of double-striking or clipping along the beaded outer border.
- Anglo-Saxon & Norman Silver Pennies: Identified by moneyer name and mint town on the reverse
- Henry VIII Gold Angel: Replaced the Noble as England's premier 80-grain gold piece
- Elizabeth I Pound (20 Shillings): Large Tudor hammered gold showing crowned profile bust
- Charles I Oxford Triple Unite (1642–1644): Largest English hammered gold coin (£3 face value)
Reading Privy Marks (Initial Marks) to Date Undated Hammered Coins
Prior to Edward VI's 1551 coinage, most English hammered coins carried no numerical year. Instead, mint officials engraved tiny privy marks—also called initial marks—at the start of the obverse and reverse legends to track silver and gold pyx trials (Trial of the Pyx) during specific accounting periods.
By matching symbols such as a cross patonce, sun, anchor, lis, tun, or triangle-in-circle against Royal Mint assay records, numismatists pinpoint the exact years—and sometimes the exact months—a coin was struck at the Tower of London or a provincial Civil War mint.
- Common Tudor/Stuart initial marks: Lis, Pheon, Rose, Lion, Anchor, Mullet, Star, Eye, Sun
- Overstruck privy marks reveal dies reused across successive pyx trial periods
- Provincial mint marks (e.g., OX, BR, W, C, Y) trace Charles I's travelling Royalist mints
- Coiners' marks and legend punctuation varieties separate major Spink catalogue numbers
Briot, Blondeau, and the 1662 Milled Coinage Revolution
Widespread illegal silver clipping—shaving precious metal from the irregular edges of hammered coins—crippled seventeenth-century English commerce. French-trained engravers Nicholas Briot (under Charles I) and Pierre Blondeau (during the Commonwealth and Restoration) pioneered horse-drawn rolling mills, mechanical blank cutters, and heavy screw presses.
In 1662, Charles II abolished hammered production in favour of full mechanised milled coinage. Blondeau's secret collar mechanism impressed raised edge lettering (DECUS ET TUTAMEN — 'an ornament and a safeguard') on crowns and halfcrowns, and diagonal or chevron graining on smaller silver and gold denominations, making illicit clipping immediately obvious.
- 1662: Permanent transition from hammered hand-striking to milled screw-press coinage
- Uniform circular flans, consistent thickness, and raised/milled protective edges
- Consistent obverse-to-reverse die alignment (coin orientation vs medal orientation)
- Standardised numerical dates placed visibly in the legend or exergue
Assessing Condition and Authenticity Across Both Techniques
Grading standards differ markedly between hammered and milled coinage. A hammered silver penny with full legend, crisp hair curls, and unclipped full round flan in Very Fine (VF) can rival an Uncirculated milled coin in desirability, whereas minor striking weakness in one quadrant is normal if the high reliefs show zero circulation wear.
When authenticating hammered pieces, specialists watch for 'pressure-cast' modern copies that mimic surface roughness while lacking crisp metal flow lines in the legends, and verify that silver weight matches statutory clipping limits rather than modern underweight silver-plated replicas.
- Check for metal flow lines radiating toward the legends—hallmarks of a genuine hammer strike
- Inspect hammered flans for legitimate medieval 'peck marks' or test cuts vs modern tooling
- For milled coins, examine denticles (beading) near the rim for crisp, uniform strike definition
- Note whether a hammered coin has been 'plugged' or straightened after bending in antiquity
Hammered vs. Milled British Coinage Comparison
| Attribute | Hammered Coinage (c.600–1662) | Milled Coinage (1662–Present) | Numismatic Significance |
|---|---|---|---|
| Striking Method | Hand-cut blanks struck with hammer and dies | Rolled strip, blanked & struck in collar screw press | Hammered coins are unique; milled coins are uniform |
| Edge Treatment | Plain, irregular, vulnerable to clipping | Inscribed (DECUS ET TUTAMEN) or reeded/grained | Clipped hammered coins trade below full-flan examples |
| Dating System | Privy/initial marks (pre-1551) or date | Explicit numerical year & regnal edge year | Privy marks allow exact Trial of the Pyx dating |
| Gold Alloys | Fine gold (23ct+ Angel/Sovereign) & Crown gold (22ct) | 22ct Crown gold (.9167) standardised | Early Tudor Angels contain 99%+ pure gold |
| Grading Emphasis | Flan fullness, centring, legend clarity | Fields, cartwheel lustre, contact bagmarks | Weak strike on hammered does not equal wear |
Transitional milled patterns by Nicholas Briot (1631–1639) and Pierre Blondeau (1651–1658) bridged the two eras before 1662.
Worked Illustration: Attributing an Undated Hammered Silver Groat vs. a 1662 Crown
This worked illustration demonstrates how a numismatist catalogues an undated Tudor silver groat alongside an early Restoration milled crown.
- Step 1 (Hammered identification): Read the obverse legend ('HENRIC VIII') and identify the facing or profile bust style to narrow the coinage period (First, Second, or Third Coinage).
- Step 2 (Privy mark matching): Examine the small symbol at 12 o'clock before the legend (for example, a 'Lis' or 'Rose') and match it against Spink's Henry VIII initial-mark table to assign exact minting years.
- Step 3 (Flan & weight check): Weigh the hammered groat (~2.5–3.1 g depending on debasement phase) and verify whether the outer beaded circle remains intact without clipping.
- Step 4 (Milled comparison): For a 1662 Charles II crown, verify the date on the reverse/edge, confirm ~30.1 g sterling weight, and check the Rose privy mark beneath the bust.
Worked Illustration Outcome: Privy-mark sequencing dates pre-1551 hammered coins accurately to their Tower Mint pyx period, while collar-milled edge inscriptions and explicit dates anchor post-1662 attributions.
Six-Point Hammered & Early Milled Inspection Checklist
- Identify the mint initial/privy mark on both obverse and reverse (note any mixed or overstruck marks).
- Inspect the outer beaded border to distinguish a full, unclipped flan from a clipped example.
- Separate localized weak striking (flat opposite high relief) from genuine circulation wear.
- Check hammered coins under oblique light for old repairs, solder plugs, or straightening creases.
- Weigh the piece against the exact statutory weight standard for that monarch's coinage issue.
- Record the Spink (S.) and North (N.) catalogue numbers alongside any die-axis measurement.
Frequently Asked Questions
Why do some hammered coins have flat patches even when the rest of the design is sharp?
Because dies were struck manually and blanks varied slightly in thickness, high relief on one side could starve metal flow directly opposite on the other side, creating localized 'weakness of strike' rather than wear.
What is a 'privy mark' on an English hammered coin?
A privy mark (or initial mark) is a small symbol engraved before the legend—such as a cross, rose, sun, or anchor—used by the Royal Mint to identify batches of coins submitted to the Trial of the Pyx for purity testing.
Why did Charles I strike coins in Oxford and Shrewsbury instead of London?
When Parliament seized Tower Hill Mint at the outbreak of the English Civil War in 1642, Charles I established royalist mints in provincial strongholds—most famously Oxford, where the 1643 Triple Unite was struck from donated college silver and gold.
What does 'DECUS ET TUTAMEN' mean on milled British crowns?
Drawn from Virgil's Aeneid, the Latin motto translates as 'an ornament and a safeguard'—literally referring to how raised edge lettering both decorated the coin and protected it from illegal metal clipping.
Primary References & Standards
- North, J.J., English Hammered Coinage, Volumes I & II, Spink & Son.
- Challis, C.E. (ed.), A New History of the Royal Mint, Cambridge University Press.
- Spink & Son, Coins of England & the United Kingdom (Standard Catalogue of British Coins).